K-type reciprocating feeder (Feeder) product introduction:
K-type reciprocating feeder (Feeder) is the use of the crank rod drag the bottom of the dip of 5° under the linear reciprocating motion in roller Thus the coal or other milling performance of small, less viscous loose granular, powdery material from the unloading of the equipment in evenly feeding into access device.
K-type reciprocating feeder (Feeder) applies to the mine, Mining, coal preparation, A transit point, the coal handling plant, Bulk material transfer ports and bulk terminals can be bulk material reproduced by uniform bin or directly into the tape machine, or other screening equipment, storage devices, etc. Used in conjunction.The realization of the ore, sand and coal, grain and other feeding of bulk materials. This equipment is installed on the lower part of the hopper body, the driving device is mounted, in accordance with the size of the amount of feed can be divided into: K1, K2, K3, K4, such as several types.
K-type reciprocating feeder (Feeder) feature:
1. Reliable operation, long service life, light weight, small volume, convenient maintenance.
2. Simple structure, reliable operation, convenient installation, the use of closed frame structure, greatly improve the stiffness of the frame.
3. The limit of constant filling fluid coupling can be started with full load and overload protection.
4. The largest amount of feed up to 1200 tons/hour (coal), is the largest reciprocating feeder.
5. The introduction of advanced planar double-enveloping reducer design of mule bars, large carrying capacity, high transmission efficiency.
6. The side plate, oblique liner and floor adjustable seam between, can accurately control the size of stay when seaming, greatly reducing the material leakage.
7. The symmetrical layout of the driving device and the double-push, to make the entire machine stress balanced, stable transmission, the Elimination of the phenomenon of the torsion pendulum when the reciprocating the floor.
8. The floor has a vertical rib plate, and three full-length roller bearing to ensure that the stiffness of the floor itself, the Elimination of the existing reciprocating feeder floor of the shortcomings of the bending deformation of work.
9. The wear resistant steel plate lining board is composed of small pieces together, This not only light and easy replacement, And according to the actual abrasion for the balance, targeted replacement of the worn liner plates in order to make rational use of material and reduce maintenance costs.