Intelligent slag removal machine installed at the end of the drum or the bottom of the hopper conveyor belt; The screen consists of a number of parallel arrays of stainless steel or composition of polyurethane roller The adoption of roller bearing bases are fixed on the shell, The two ends of the chain drive and rotation, the direction of its rotation and speed can be controlled by PLC, with material flow in the same direction (or vice versa).Having its source of power for the left and right sides of K series gear reducer, the left and right two-way drive, in order to prevent the screening of the material jammed the shaft, fitted with a safety device.The machine is equipped with rotary mechanism, can according to need to adjust the angle.
Field of application:
Intelligent slag removal machine is the actual situation of the company for all kinds of belt conveyor equipment, comprehensive analysis and comparison of their characteristics, by trial and error, specializes in the design of the equipment.Apply to:
Solid-state separation impurity removal of bulk materials;
Applicable to the metallurgical, coal, ore, building material, such as sorting, separation impurity removal of materials;
In the transportation equipment, suitable for the sintering plant Effective bulk of the material transported to remove the tape, wire, thread, fabric and other debris to prevent large pieces of debris around the roller, scoring belt and into the next process.
1. The material in the course of transmission, changes in the nature of the material does not occur.
2. XCZB intelligent slag removal machine adopts PLC control, Single and double the number of two groups of driving device, control screen roller, and orthogonal angle of decelerate of hard tooth flank configuration of the hollow shaft directly on the set in driving the spindle, compact structure, beautiful appearance.
3. The use of frequency converter can easily set the speed of the roller screen.
4. Bearing with sealed bearings with housings, gear box of the sealing is tight, dust, no place to drill.
5. With no vibration, low noise.
6. The high screening efficiency and production capacity.
7. Angle can be adjusted.According to the material properties and the requirements of the site, with the exception of the tilt angle of the sieve can be between 5~30 degrees.
8. Non-blocking screen, not the card screen.When such a situation arises, the The self-cleaning sieve commencement of the proceedings, by adjusting the rotation direction and the rotation speed of the screen roller and, if necessary, in addition to adjust the angle of complex machine, will be cleared of debris.
9. The bearing is provided with automatic alarm device, when the bearing of oil or when the temperature warning device to warn a timely manner.
10. Alarm device for the transmission part is provided with a broken chain.
11. Long service life, convenient installation, easy operation and maintenance.